Modelling Workbench - Tools

Tools

1. Soldering Iron with range of bits
1A. Temperature control unit for Soldering Iron
2. Bottle of flux for Brass
3. Small Jeweller's screwdriver - one of a set
4. Box for small metal parts e.g. nuts & screws.
5. Tin containing a range of burrs for mini-drill; mini-drill not shown
6. Twist drills for mini-drill - 0.5, 0.7, 0.9, 1.0, 1.1, 1.2, 1.5, 2.0, 2.5mm
7. Small electrician's screwdriver
8. Hardwood work surface
9. Small cube of mild steel ~40mm - a hundred & one uses
10. Small half-round file - coarse
11. Large modelling knife with square, chisel blade
12. Square file - coarse
13. Medium size flat file - coarse
14. Universal Needle file handle
15. Acute angled Needle file with curved (to a point) end
16. Burnishing/cleaning pen - screw-feed steel, brass & Fibreglass
17. Small parallel jaw pliers
18. Small (wire) side-cutters
19. Small rat-nose pliers
20. Small flat file - fine / finishing
21. Pin Chuck / Vice

Other indispensable tools, not shown, are:-

Back